Skip to main content
Version: Nightly 🚧

Website Development

Getting Started​

First, for simple changes to the website, such as fixing typos, the easiest way is to scroll to the bottom of the page, follow the link at the bottom to send a pull request, edit the resulting page, and issue a pull request.

For more elaborate changes, including adding new pages, you will need to clone the GitHub repository. You can then build the website by following the instructions in the README file. This way, you can test your changes before issuing a pull request.

Editing the Handbook​

The handbook is the most updated part of the website and it includes quite a bit of infrastructure to support writing pages that describe features in any or all of the target languages. The root of the handbook pages is the packages/documentation part of the repo. That directory has a useful README file that describes the structure and provides instructions for inserting code examples in any target language and target-specific text within a body of target-independent text.

Infrastructure​

Docusaurus​

Our website is built on top of Docusaurus, a documentation website generator maintained by Meta. Most of the functionalities are built with Docusaurus or plugins made for it to ensure that we spent minimal effort touching actual infrastructure code. You can find documentation on their website. Most of the website customization can be done by tweaking configurations, without touching any Docusaurus code.

Below are some components we made to accomodate our special needs.

Syntax highlighting​

Highlighting is handled by two separate plugins:

For languages other than Lingua Franca, highlighting is handled by Prism, which is included in Docusaurus. You can find more details in Docusaurus documentation.

For Lingua Franca, highlighting is handled by Shiki. This is mainly because we only have TextMate grammar definition and it is not easy to convert from it to Prism.

Like Prism, we are running Shiki in the browser, and the code is updated in the browser by React after it is highlighted. Shiki has a relatively large footprint, so its not necessarily encouraged to run in browsers. However, running it in browser might help SEO and makes maintenance easier.

The component we created is ShikiLFHighlighter in src/components/ShikiLFHighlighter/index.tsx. As Shiki highlights code asynchronously, the component will display the unhighlighted code first (for a very short period of time), and then asynchronously update the HTML with highlighted code using React. This will not hurt SEO because the highlight will not be considered by search engines.

Upon loading the webpage, Shiki will be initialised in the browser, loading grammars of all target languages and Lingua Franca, as configured in clientModules section in docusaurus.config.js and src/components/ShikiLFHighlighter/shikiloader.ts.

We further changed Docusaurus' CodeBlock to use ShikiLFHighlighter if the code language matches a pattern that indicates the code language is Lingua Franca, so using ``` notation in Markdown with language lf could give us the correct highlight result. You can check src/theme/CodeBlock/index.js for more details.

note

Unlike the custom syntax highlighter in our old website, without specifying target C, the highlighter will not be able to highlight target language code correctly as it lacks context - even if the language specified is lf-c. This will be solved in future updates to the highlighter.

Syntaxes for Lingua Franca Syntax Highlighting​

In Markdown​

In Markdown, the only possible way to highlight Lingua Franca code is to use the ``` notation with lf-* language designation, e.g.:

```lf-c
target C;
main reactor Troll {
    // ....
}
```
In MDX​

Apart from the markdown syntax, you can also use <CodeBlock /> component which is provided by Docusaurus. You can check here for more details.

We have also created a bunch of useful utility components to aid the target selection.

Multi-Target Utilities​

Our whole Multi-Target infrastructure is built on top of Docusaurus' Tabs component.

In general, different targets are just a bunch of Tab components with groupId='target-languages'.

LanguageSelector​

The target selector, which appears on the top, is a Tab component with no content. It is defined in src/components/LinguaFrancaMultiTargetUtils/LanguageSelector.tsx.

Usage​

<LanguageSelector c cpp py rs ts /> where the target languages could be a subset of all targets which we support. The ordering is guaranteed to be C C++ Python Rust TypeScript, regardless of the ordering supplied as argument.

Examples​

<LanguageSelector rs c ts />

Rendered as

This article has examples in the following target languages:

<LanguageSelector rs c ts cpp py />

Rendered as

This article has examples in the following target languages:

LangSpecific​

LangSpecific generates a Tab and a bunch of TabItem. It is defined in src/components/LinguaFrancaMultiTargetUtils/LangSpecific.tsx.

Usage​

It's not really used as a group of ShowIfs + ShowIf would look better, or, if codes are to be displayed, you should use NoSelectorTargetCodeBlock. In general, it looks like <LangSpecific c={<div>hello</div>} cpp={<div>std::hello</div>}/> where, for the props, the keys are target languages, and values are ReactNode to be displayed.

NoSelectorTargetCodeBlock​

NoSelectorTargetCodeBlock is shorthand for LangSpecific with CodeBlock or ShikiLFHighlighter inside of it.

Usage​

NoSelectorTargetCodeBlock takes this type of props:

interface prop {
    [...target]: string;
    lf: boolean;
}

Where the target languages as key could be a subset of all targets, and the value should be the code to be rendered. And when lf=true, the codes are rendered as Lingua Franca with target language set to the designated target language.

Examples​
<NoSelectorTargetCodeBlock c='printf("hi!")' cpp='std::cout<<"hi!"' rs='println!("Hi!")' />
Rendered as
printf("hi!");
<NoSelectorTargetCodeBlock lf c='target C;' cpp='target Cpp;' rs='target Rust;' ts='target TypeScript;' />
Rendered as
target C;

ShowIfs/ShowIf​

ShowIfs and ShowIf form a Tab and a number of TabItem. They are defined in src/components/LinguaFrancaMultiTargetUtils/ShowIf.tsx.

Specifically - you MUST use ShowIf inside of a ShowIfs, and a ShowIfs MUST contain at least one ShowIf as its child.

Usage​
    <ShowIfs>
        <ShowIf c>
            {/* Markdown contents */}
        </ShowIf>
        <ShowIf cpp py ts>
            {/* Markdown contents */}
        </ShowIf>
    </ShowIfs>

Where the target languages could be a subset of all targets which we support but must NOT collide. As long as you have more than one ShowIf inside you can have as many as you like.

Example​
    <ShowIfs>
        <ShowIf c>
            This is shown when the C target is chosen.
        </ShowIf>
        <ShowIf cpp py ts>
            C++, Python and Typescript-related content is shown here.
        </ShowIf>
    </ShowIfs>
    {/* No Rust here! If you choose Rust from the language selector, you will get what you chose before you chose Rust. */}
Rendered as

This is shown when the C target is chosen.

ShowOnly​

warning

ShowOnly uses hacky Docusaurus-internal methods for the time being. To ensure better compatibility, you should prefer ShowIf.

Sometimes, you want to display a piece of information only for one language. While you can use ShowIfs and one ShowIf inside of it, the issue people typically discover is that the rendered result looks miserable, because each Tab will add some sort of padding above and below it.

For this, we built ShowOnly which reads the selected tab from @docusaurus/theme-common/internal/useTabs and displays the information inside if the target selected matches, and the output is a <div> or a <span> so that it looks like it's blended in. This is hacky and could break any time if docusaurus decides to change how their Tabs work.

Usage​
    <ShowOnly c cpp
    inline>
    {/* Markdown contents */}
    </ShowOnly>

Where the target languages could be a subset of all targets which we support. If you include inline it will result in a <span>, if not, a <div>.

Examples​
The language which you used yells:
<ShowOnly c cpp >Segfault!!!!!!</ShowOnly>
Rendered as

The language which you used yells:

Segfault!!!!!!

I am <ShowOnly c cpp inline>not</ShowOnly> memory safe!
Rendered as

I am not memory safe!

ShowIfsInline​

warning

ShowIfsInline uses hacky Docusaurus-internal methods for the time being. To ensure better compatibility, you should prefer ShowIf.

danger

TBD, I didn't find any usage for now; maybe drop it?

Code Importation​

Unlike the previous website that used a preprocessor to correctly display the code, this website we uses MDX with Webpack loader. This allows us to "import" the Lingua Franca source code as a string.

To ensure proper imporation in Webpack 5 (there are other ways, by adding magic after the filename, in Webpack 4), in docusaurus.config.ts we have this small plugin:

plugins: [
() => ({
    name: 'read-lf-source-code-files',
    configureWebpack: () => ({
    module: {
        rules: [
        {
            // Any LF file that lies in path where some directory is named "codes"
            test: /codes?\/.*\.lf$/,
            type: "asset/source",
        },
        ],
    },
    })
}),
],

With this, if you use the statement like import C_Schedule from '../assets/code/c/src/Schedule.lf'; you will get a TS string which Webpack loads when building. Then, you could use NoSelectorTargetCodeBlock to show a bunch of lf code.

info

Remember to use relative import! If you don't, you will mess up the versioning.

Example with NoSelectorTargetCodeBlock​

import C_HelloWorld from '../assets/code/c/src/HelloWorld.lf';
import Cpp_HelloWorld from '../assets/code/cpp/src/HelloWorld.lf';
import Py_HelloWorld from '../assets/code/py/src/HelloWorld.lf';
import Rs_HelloWorld from '../assets/code/rs/src/HelloWorld.lf';
import TS_HelloWorld from '../assets/code/ts/src/HelloWorld.lf';

<NoSelectorTargetCodeBlock c={C_HelloWorld} cpp={Cpp_HelloWorld} py={Py_HelloWorld} rs={Rs_HelloWorld} ts={TS_HelloWorld} lf />
Rendered as
target C main reactor { reaction(startup) {= printf("Hello World.\n"); =} }

DynamicMultiTargetCodeblock​

danger

This is not working properly with versioning and will have issues with Webpack performance!

danger

This is not working properly now! Need to fix the file path in content in DynamicMultiTargetCodeblock.tsx.

If you are really lazy, there is a utility which I wrote, DynamicMultiTargetCodeblock, that allows you to only supply a LF filename and all files will be dynamically imported. The issue is Webpack is not intelligent enough so if you use it, it will probably load all LF files in assets. Also, because relative import appears to be impossible, using it will always get you the latest code examples. See src/components/LinguaFrancaMultiTargetUtils/DynamicMultiTargetCodeblock.tsx.

Examples​
<DynamicMultiTargetCodeblock c cpp ts rs py file="HelloWorld" />

To suppress warning, add

<DynamicMultiTargetCodeblock doNotTransformInMDX c cpp ts rs py file="HelloWorld" />

DynamicMultiTargetCodeblock with TransformDynamicLFFileImportToStatic​

danger

This is an experiment and should not be used in production!

A way to make DynamicMultiTargetCodeblock more sane is to use remark and preprocess it into a bunch of import statements and a NoSelectorTargetCodeBlock.

src/remark/TransformDynamicLFFileImportToStatic.ts is a remark plugin that does so. It looks like a disaster and I don't understand it anymore 5 months after writing it.

To use it, add it to docusaurus.config.ts as a ReMark preprocessor.

But don't use it.

Routing from the Legacy Site​

docs/legacy_routing.ts contains the old-to-new URL mappings which allows people to access the correct content if they used a URL from the old website. It is then imported in docusaurus.config.ts For more, check @docusaurus/plugin-client-redirects.

Maintenance, and point-of-contact​

For docusaurus-related question, you should redirect your question to them.

The LF syntax file is fetched here and should be updated from time to time. If the syntax highlighting is not working properly, check the TextMate grammar, then check with shiki.

For website-specific utilities, you can open an issue on GitHub or ask @axmmisaka directly.